Cutek Wood Preservative

Weight 10.02 kg
Size

10L, 20L, 5L, Sample

SKU: CU WP Categories: , , , , ,

$0.00$686.00

Clear

Compare

Product Description

Cutek Wood Preservative is an oil-based wood stabiliser used for pre-treatment and remedial treatment of exterior wood in industrial and domestic situations.
Cutek Wood Preservative coated wood resists damage caused by fungal decay, mould and termites.
Cutek Wood Preservative also protects exterior woods from moisture, improving dimensional stability and minimising warping, cupping, and splitting.
Cutek Wood Preservative comes as a clear oil which fades in the sun to a natural silver patina but at slower rate that Cutek CD50. It may also be mixed with any of our 10 colourtones to enhance and maintain the freshly oiled natural look of your timber.
Cutek Wood Preservative is NOT suitable for use on acetylated wood.

Preparation

Important DO NOT USE on surfaces which come into direct contact with foodstuffs, eg use in packing cases or places where food is prepared or stored. DO NOT USE on surfaces which come into direct contact with the ground. All cutting, drilling, moulding and planning should be done before treatment. Wood components should be treated before joining or fixing New Wood Ensure that timber to be coated is clean and dry. CUTEK Wood Preservative can be used on treated timber, however wood with mill glaze, or pre-treated with wax and polymer processes such as LOSP may require cleaning first with CUTEK Proclean. Old, or Previously Coated Wood Old, dirty, stained or weathered timber should be prepared by first applying CUTEK Proclean restoration agent, then power rinsing with a high-pressure washer set to under 750 p.s.i. (50 bar), with a fan jet pattern to avoid damage to the wood fibre. Once the timber is thoroughly dry, apply two coats of CUTEK Wood Preservative. Wood previously coated with a film forming product such as stains, linseed oil, paint, polyurethane, etc., must first be restored with CUTEK CD33 Naked paint stripper and CUTEK Proclean prior to the application of CUTEK Wood Preservative. This process can be complex, so view the videos on this website for more information.

Application

Avoid contact with plants, shrubs, trees and waterways. For best results, use a brush, paint pad or roller to apply one coat of CUTEK Wood Preservative to all faces of the wood prior to installing, with a second coat applied to the top surface once the first coat is completely dry. Spray application is not recommended. Wood must feel completely dry and non- one coat of CUTEK Wood Preservative should be applied to all faces of the wood prior to installing, with a second coat applied to the top surface once the first coat is completely dry. Penetration time varies significantly, depending on species, temperature, porosity, and moisture content of the wood. Thicker sections such as post, beams and logs will require additional coats, as CUTEK Wood Preservative has a cumulative effect in the wood. Apply each coat evenly with brush, paintpad or roller. When using CUTEK Colourtone it is essential that the container holding the oil be stirred frequently both before and during use. Two or three thin coats on finished wood and hardwoods are better that one or two thick coats. Wood must feel completely dry and non-greasy before application of the second coat. Do not handle treated timber until the product solution has dried. If prior handling is required, wear elbow-length chemical resistant gloves. Always remember that CUTEK Wood Preservative is toxic to fish and aquatic invertebrates. DO NOT contaminate streams, rivers or waterways with the chemical or used container.

You may also need