Medium Oak

Weight 1.1 kg

0.5L, 100 ml Sample, 1L, 2L

SKU: Tf1182 MO Categories: , , , , , , , , , ,




Product Description

Wood doesn’t always match the other colours in your home so Treatex have developed a range of colour tones to assist in the matching process. As various timbers will take colours differently, we do advise to do a sample before applying to the whole area. The pigments are colourfast. Using natural pigments enhances the grain & strengthens the colours. Intermixable, all Treatex Colour Tones can be mixed to make an infinite range of colours. Easy to apply, No overlapping, applicator marks.


We will soon be replacing all of the Treatex Colour Tones with the Evolution Colour Range, see below in “You may also need” to see which colours are closest to the desired Treatex Colour Tone.


If the surface to be treated is rough, sand smooth with 80-120 grit sandpaper. If a previous surface coating finish is present e.g. varnish, lacquer, hard wax oil etc. sand back to bare wood, again using 80-120 grit sandpaper. Remove any dust, dirt and make sure the surface to be treated is clean, free of contaminates and thoroughly dry. We advise that when using colours, sufficient product is purchased to complete the whole project and where more than one tin is required it is advisable to mix tins together before use. Stir tins and ensure product is at room temperature before use. We strongly recommend a small trial application. Always refer to the full information sheet for more detailed information.


One coat of Treatex Colour Tone should be brushed, trowelled, buffed, or rolled on thinly and evenly. Remove any excess product immediately with a lint free cloth or buffing machine. Don’t worry about overlapping areas where the excess has already been clothed off, you will not leave join marks. Allow to dry – maintaining warmth and ventilation will enable the surface to dry faster, 12 to 24 hours, once dry, seal with two coats of Hardwax Oil.

You may also need