Invisible Anti-Slip Protection for Stair Treads Kit

Categories: ,

$108.90

In Stock

Compare

Product Description

Anti-Slip is ready to use and is designed to be applied with  Evolution Hardwax Oil (Matte, Classic, Satin and Gloss) to increase the anti-slip level from R10 to R12. It’s suitable for all wooden and cork flooring surfaces and is ideal for stairs, wet areas, ramps and doorways.

Each kit contains:

Preparation

Surface must be properly sanded, Finish sanding with 120 Screen or finer grease-free, dust-free, clean and dry. Different Timber species may give a different finish, please do a sample board if necessary. Strip or sand painted surfaces (final sanding with 150 grit or finer). Application temperature (incl. Drying) from + 8°C. Timber moisture content not more than 18%. Humidity <60%. (Switch off floor heating at least 2 days prior to treatment.) Repair holes and cracks with Whittle Waxes Wood Filler.

Application

When applying to whole tread:

  • Tape off the Stringers and base of the Riser
  • Stir Anti-Slip well
  • Cut in with Brush and using the supplied Roller Apply a thin even coat of Anti-Slip.
  • Allow to dry overnight
  • Apply a thin even Coat of Evolution Hardwax Oil
  • Remove tape.


When applying to the nosing:

  • Clear coat the stairs with Evolution and allow to dry
  • Tape off the Nosing, 75mm back from the edge
  • Tape the stringers adjacent to the nosing
  • Stir Anti-Slip well
  • Cut in with Brush and using the supplied Roller Apply a thin even coat of Anti-Slip
  • Allow to dry overnight
  • Apply a thin even Coat of Evolution Hardwax Oil
  • Remove tape.

You may also need